Scan to BIM

Scan to BIM Services in the USA

Accurate point-cloud-to-Revit as-built models for the USA.

The Zenith Visions delivers Scan to BIM services to architects, engineers, surveyors and contractors across the USA — from New York, Los Angeles, Chicago, Houston and beyond. Send us your laser-scan point cloud and we register it and model accurate as-built geometry for architecture, structure and MEP, up to LOD 500. It is the fastest way to base renovation, retrofit, extension and facility-management decisions on what is really there.

Coverage

the USA

Input

E57, RCP, LAS, LAZ

Level of detail

Up to LOD 500

Typical lead

5 to 15 days

Our take

Build on what is really there

Existing drawings for buildings in the USA are often outdated, incomplete or simply wrong. A scan-based model gives you the truth, measured to within millimetres, so design and construction decisions stand on solid ground.

Built for the USA

Sector and standards aware

We routinely model commercial real-estate retrofit, healthcare facilities, data centers projects typical of the the USA market, delivered to the US National CAD Standard and owner BIM requirements so the model drops straight into your BIM workflow.

What’s included

Deliverables & capabilities

Point cloud registration
As-built architectural models
Structural and MEP as-builts
Deviation and accuracy analysis
Heritage and retrofit models
IFC deliverables

Why the USA teams choose us

A remote Scan to BIM partner that works like it is down the hall

USA coverage

We deliver Scan to BIM across the USA — from New York and Los Angeles to the rest of the country — working remotely with your survey and design teams in your time zone.

Sector experience

Hands-on experience with commercial real-estate retrofit, healthcare facilities, data centers projects, the building types that drive the most Scan to BIM demand in the USA.

Standards & compliance

Deliverables aligned to the US National CAD Standard and owner BIM requirements, built in your Revit template and naming convention.

Cost & turnaround

Typically 40–60% lower cost than in-house production, with most jobs delivered in 5 to 15 working days.

FAQs

Scan to BIM in the USA — common questions

Do you provide Scan to BIM services across the USA?

Yes. We work remotely with surveyors, architects, engineers and contractors throughout the USA, including New York, Los Angeles, Chicago, Houston. You send the registered or raw point cloud (E57, RCP, LAS or LAZ) and we deliver accurate as-built Revit models, with no need for us to be on site.

What level of detail can you deliver for the USA projects?

Anything from LOD 100 massing to LOD 500 verified as-built. We model architecture, structure and MEP to the LOD your project needs, and run a deviation check against the point cloud so you can see exactly how closely the model tracks the real building.

How do you handle the USA standards and BIM requirements?

We deliver to the US National CAD Standard and owner BIM requirements, using your Revit template, title block and naming convention so the model drops straight into your workflow. If you do not have a standard set up, we can advise on one.

How accurate and how fast is your Scan to BIM service?

We typically hold modelled geometry within a few millimetres of the point cloud, and most commercial real-estate retrofit and commercial jobs are delivered in 5 to 15 working days depending on size and LOD — usually at 40–60% less than equivalent in-house production.

Start something

Need Scan to BIM in the USA?

Send us a point cloud, a markup or just a question. We will give you an honest scope, timeline and fixed fee within 24 hours — no obligation.

Get a free quote

Scan to BIM Services by Country